x

bang ma loi VA RESET may photocopy xerox thuong gap


Code: 010-397
Display: 010-397 Restart Printer Contact Support If Message Returns
Description: Fusing Failure Fusing temperature anomaly detected

Code: 016-315
Display: 016-315 Restart Printer Contact Support If Message Returns
Description: DRAM check failure DRAM check error occurred

Code: 016-317
Display: 016-317 Restart Printer Contact Support If Message Returns
Description: ROM content invalid Invalid ROM content detected.

Code: 016-501
Display: 016-501 Write Flash Error Contact Support If Message Returns
Description: Write Flash Error Can not update application code in FLASH

Code: 016-502
Display: 016-502 Write Flash Error Contact Support If Message Returns
Description: Write Flash Error Can not update parameters in FLASH

Code: 016-718
Display: 016-718 Memory Full Job Failure Press Ok
Description: Memory Over flow The current job exceeds memory capacity.

Code: 016-719
Display: 016-719 Decode Error Job Failure Press Stop to Cancel
Description: Decode error Decode error is detected.


Code: 016-720
Display: 016-720 PDL Request Data Violation Press Ok
Description: PDL Error The print data cannot be processed by PDL

Code: 016-744
Display: 016-744 Format Error Invalid Data Press Ok
Description: Download Format Error Invalid code to be downloaded.

Code: 016-745
Display: Format Error Invalid Data Press Ok
Description: Download Format Error Invalid code to be downloaded.

Code: 016-749
Display: 016-749 PJL Request Data Violation Press Ok
Description: PJL Request Error Print data cannot be processed by PJL

Code: 024-340
Display: Restart Printer Contact Support If Message Returns
Description: MCU Firmware Error

Code: 024-360
Display: 024-360 Restart Printer Contact Support If Message Returns
Description: MCU Firmware DownLoad Error

Code: 024-371
Display: 024-371 Restart Printer Contact Support If Message Returns
Description: MCU-ESS Communication Fail Communication fail between MCU and ESS
Description: Paper Size Mismatch The size of paper in the Tray does not match the specified print size XXXXXX: Paper Size YYYYYY: Paper TypE
Code: 024-963
Description: No Paper/Jam Tray has run out of paper, or Regi sensor is not turned ON within the specified time.

Display: 024-963 No Paper Load Paper then Press Ok XXXXX (or YYYYY)
Description: No Paper/Jam Tray has run out of paper, or Regi sensor is not turned ON within the specified time.

  • Code: 041-340
    Display: 041-340 Restart Printer Contact Support If Message Returns
    Description: NVM (read/write error detected.

    Code: 061-370
    Display: 061-370 Restart Printer Contact Support If Message Returns
    Description: LPH failure detected.

    Code: 075-100
    Display: 075-100 Paper Jam Jam at Feed Open Rear Cover and Remove Paper
    Description: No Paper/Jam Tray is out of paper, or Regi sensor is not turned ON within the specified time.

    Code: 075-921
    Display: 075-921 Insert Output to Tray Press Ok to Continue Printing
    Description: Insert Output to Tray The sheet on which to print an oddnumbered page has not been loaded in the Tray for manual duplex printing.

    Code: 077-100
    Display: 077-100 Paper Jam Jam at Feed Open Rear Cover and Remove Pape
    Description: No Paper/Jam Tray is out of paper, or Regi sensor is not turned ON within the specified time.

    Code: 077-104
    Display: 077-104 Paper Jam Jam at Exit Open Rear Cover and Remove Paper
    Description: Regi Jam The paper does not pass through the Regi Sensor on time.


    Code: 077-106
    Display: 077-106 Paper Jam Jam at Exit Open Rear Cover and Remove Paper
    Description: No Paper/Jam Tray is out of paper, or Regi sensor is not turned ON within the specified time.

    Code: 077-108
    Display: 077-108 Paper Jam Jam at Exit Open Rear Cover and Remove Paper
    Description: Exit Jam The paper does not pass through the Exit Sensor on time.

    Code: 077-109
    Display: 077-109 Paper Jam Jam at Exit Open Rear Cover and Remove Paper
    Description: Exit Jam The paper does not pass through the Exit Sensor on time.

    Code: 077-304
    Display: 077-304 Close Rear Cover
    Description: Rear Cover Open

    Code: 077-900
    Display: 077-900 Paper Jam at Exit Open Rear Cover and Remove Paper
    Description: Paper Remains at Exit Paper remains in Exit Sensor.

    Code: 077-901
    Display: Paper Jam at Exit Open Rear Cover and Remove Paper
    Description: Paper Remain at Regi Sensor.

    Code: 091-402
    Display: 091-402 Restart Printer Contact Support If Message Returns
    Description: Xero Near Life

    Code: 092-651
    Display: 092-651 Restart Printer Contact Support If Message Returns
    Description: CTD (ADC) sensor error

    Code: 092-661
    Display: 092-661 Restart Printer Contact Support If Message Returns
    Description: Environment Sensor Error The Environment Sensor detected a temperature anomaly

    Code: 093-426
    Display: 093-426 Toner Cartridge is Close to Life
    Description: Toner Cartridge Life Warning The Toner Cartridge is approaching the replacement time

    Code: 093-926
    Display: 093-926 CRUM ID Reseat Black Cartridge
    Description: K CRUM ID Error An unsupported Toner Cartridge is detected.

    Code: 093-933
    Display: 093-933 Replace the toner cartridge or check the cartridge is correctly set
    Description: Toner Cartridge Life Over (K) The Toner Cartridge has reached the replacement time

    Code: 093-974
    Display: 093-974 Insert Print Cart Insert Toner Cartridge
    Description: Toner Cartridge Detached The Toner Cartridge is not installed

    Code: 116-314
    Display: 116-314 Restart Printer Contact Support If Message Returns
    Description: ESS Network MAC Checksum Error Checksum error in MAC address.

    Code: 116-323
    Display: 116-323 Restart Printer Contact Support If Message Returns
    Description: Checksum error (Fax) Checksum error for Fax parameter is detected.


    Code: 116-325
    Display: 116-325 Restart Printer Contact Support If Message Returns
    Description: Checksum error (Other)

    Code: 116-326
    Display: 116-326 Restart Printer Contact Support If Message Returns
    Description: Checksum error for Scannr parameter is detected.

    Code: 116-335
    Display: 116-335 Restart Printer Contact Support If Message Return
    Description: Checksum error (Network) Checksum error for Network parameter is detected.

    Code: 116-355
    Display: 116-355 Restart Printer Contact Support If Message Return
    Description: ESS Network Fatal Error. Error during the onboard network check.

    Code: 117-331 … 117 366
    Display: 117-331 Restart Printer Contact Support If Message Return
    Description: ESS-related error

    Code: 124-333
    Display: 124-333 Restart Printer Contact Support If Message Return
    Description: ASIC Failure ASIC failure detected

    Code: 191-310
    Display: 191-310 Restart Printer Contact Support If Message Return
    Description: XERO Life Over The Printer has reached the replacement time


  • Ngày: 2017-03-16
Xu hướng tìm kiếm: Bang tra ma loi may photocopy Xerox v2060 , v3060 , v3065

Cùng danh mục

Bài viết liên quan theo tags